Make your own sheath to keep Your TDI right where you need it.
The Ka-Bar small TDI knife is a staple for law enforcement nationwide. This mold will make the same sheath we sell.
Our sheaths are popular with officers from all over because of their solid retention, durability, versatility, and compact profile. Stop worrying about your TDI falling out of that factory sheath while your carrying it. The factory TDI sheaths are widely known for their lack of secure retention and limited carry options - OxCreek TDI Knife Sheaths address and fix all those problems.
I've taken all of the guesswork out of making this sheath yourself. All of my measurements are precise and designed to fit your Ka-Bar Small TDI knife perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
- This mold is the one we developed for our very popular Ka-Bar Small TDI Sheaths.
- Constructed of High-Density Polyethylene (HDPE)
- Mold features raised drill indicators for eyelets spaced on .75" centers.
- As with all my molds it features a raised border that is exactly .25" over sized from the final shape of the sheath.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Router Trim Jig?
- Due to the small size, the trim jigs are a combination trim. Each side of the sheath requires two position setups on the trim jig to get the final shape.
- The trim jigs feature locating tabs on the bottom two eyelet holes, and two threaded inserts at the top to secure it.
- Coming straight off the trim jig the retention is set extremely firm. This can be lightened if desired during the edge finishing step.
- Creates a sheath with easy and fast removal with no harnesses or straps needed to secure your TDI in the sheath because of the snug fit.
- Designed for IWB (inside the waistband) carry
- Ambidextrous
Click here for Additional Router Trim Jigs
* Includes the mold and optional Router Trim Jig only. Other hardware and supplies are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
You may also like
Your 'Easy Button' for making your own Kydex Mag Carriers.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Single Size mold will make One Magazine carrier per press.
- Double Size mold will make Two Magazine Carriers per press (Single x2).
- Specifically designed to be used with the Tulster Magazine Retention Device (MRD)
- This mold makes a Single (or single x2) Taco style magazine carrier
- Each mold is designed with FOMI blocking and our .4" blocking ensures a snug and complete seat for the MRD.
- The bottom portion of the carrier is closed.
- Constructed of High-Density Polyethylene (HDPE)
- Designed to be used with membrane-less vacuum forming, but can also work with a membrane former.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
- The double stack 9/40 option is designed to work on virtually all double stack 9/40 magazines as well as G43 and many others using the MRD retention adjustment.
- The single stack option will work on virtually all single stack magazines. Has been tested with the following:
- 1911, Shield .45, Shield 9/40, XDs 9 and .45, Sig 938
- Simply select the type of magazine you want a mold for above in the Carrier Style section.
Click Here for additional Trim Jigs
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
*Includes the mold and optional jig only. Other hardware and supplies are not included. Images of finished holsters are for reference only and not included.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Click for Instructions & Video.
Customer Reviews
Make your own Adjustable Kydex Handcuff Carrier.
I've taken all of the guesswork out of making these carriers yourself. All of my measurements are precise and designed to fit your Peerless Chain, Peerless 801 Hinge, or Smith & Wesson chain cuffs perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Mold will make one carrier per press
- Constructed of High-Density Polyethylene (HDPE)
- Designed to make a convenient yet strong fold-from-bottom style carrier.
- Designed for adjustable retention with two screws at the top of the carrier.
- .25" Gap built-in for maximum retention adjustment.
- Completely Ambidextrous
- Easily accommodates either TEKLOK or Paddle belt attachment blocking with our Setup on 1.5" centers.
- Also available without blocking to accommodate other set-ups.
- Compatible with FFR holster's single stack folding jig, or can be folded by hand using a set of cuffs.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
Click Here for Additional Router Trim Jigs
* Includes the mold and optional Router Trim Jig only.
*All other hardware and supplies pictured are not included. Finished Kydex Handcuff carrier images are for reference only and are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Customer Reviews
Your 'Easy Button' for making your own Kydex Mag Carriers.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Will make One Magazine carrier per press. (Single x2 Molds also available HERE)
- Constructed of High-Density Polyethylene (HDPE)
- Designed to be used with membrane-less vacuum forming, but can also work with a membrane former.
- Adding the Router Trim Jig option is recommended to help deliver consistent results and reduce the margin of error significantly. Need an Additional Trim Jig?
- Simply select the type of magazine you want a mold for above in the Carrier Style section.
Click here for Additional Router Trim Jigs
* Includes the mold and optional jig only.
*Other hardware and supplies are not included. Images of finished products are for reference only and not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
* The double stack mold is designed to fit Glock and M&P mags, however, it will also fit quite a few other double stack magazines.
* The Shield/XDs magazine molds were designed for Shield and you will have a .25" gap for adjustable retention. However, it will also fit the XDs magazine, but when folding the carrier you will need to fold the carrier over an XDs magazine, which will result in a smaller gap for adjustable retention, meaning, you will need a smaller spacer.
Video and Written Instructions.
Make your own Adjustable Kydex Magazine / Handcuff Combo Carrier.
I've taken all of the guesswork out of making these magazine / handcuff combo carriers yourself. All of my measurements are precise and designed to fit your Peerless Chain, Peerless 801 Hinge, ASP Hinged, or Smith & Wesson chain cuffs perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Mold will make one Magazine/Handcuff carrier combo per press
- Constructed of High-Density Polyethylene (HDPE)
- Built-in adjustable retention for both the mag and handcuff
- Designed for adjustable retention with two screws at the top of the carrier.
- Magazine carrier section designed to be adjusted with an MRD (Magazine Retention Device)
- Specially designed to be folded on the bottom to be able to give the most narrow profile available.
- Extreme versatility achieved by blocking for belt attachments with four raised circles 1.5" on center, allowing you to use paddles, TEKLOK, malice clips or any other attachment using 1.5" hole spacing.
- WorkS with all double stack 9mm, .357cal, and .40 cal magazines.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
Click Here for Additional Router Trim Jigs
* Includes the mold and optional Router Trim Jig only.
*All other hardware and supplies pictured are not included. Finished Kydex product images are for reference only and are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.