Make your own Adjustable Kydex Baton carrier.
I've taken all of the guesswork out of making these carriers yourself. All of my measurements are precise and designed to fit collapsible batons up to 1 1/8" in diameter. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Mold will make one carrier per press
- Constructed of High-Density Polyethylene (HDPE)
- Designed to make a convenient yet strong fold-from-bottom style carrier.
- Designed for use with MRD for ultimate fit adjustment.
- Easily accommodates either TEKLOK or malice clips, TEKLOK can be set up either straight up and down or on a 45* angle.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
Your 'Easy Button' for making your own Kydex Mag Carriers.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Will make One Magazine Carrier that holds Two Magazines per press
- (Different than the Single x2 Molds)
- Constructed of High-Density Polyethylene (HDPE)
- Designed to create a pancake style carrier
- Built-in angled wings to eliminate the need to bend the wings after forming
- Precise .75" hole spacing indicator marks are in place for eyelets
- Built-in .25" adjustable Retention Blocking between the two magazines
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
- Specifically designed around Glock magazine dimensions, but will also work with other double stack magazines
- Due to their height and the amount of surface area , these molds work best with non-membrane forming
- Simply select the type of magazine you want a mold for above in the Carrier Style section
Click Here for Additional Router Trim Jigs
* Includes the mold and optional jig only. Other hardware and supplies are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Grab an Additional Router Trim Jig for your Magazine carrier Mold.
If you want additional trim Jigs for your Dual Magazine Carrier Mold, we've got you covered. Trim Jigs really streamline the making process, increase consistency and speed, and reduce the margin of error significantly.
All our molds and jigs are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each jig is made to our exact specifications and held to our same high-quality-control standards.
- Trim jig will aid in the trimming and consistency of our One Magazine Carrier Mold that holds Two Magazines (Different than the Single x2 Molds)
- Constructed of High-Density Polyethylene (HDPE)
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly
* Includes the Router Trim jig only. Other hardware and supplies are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Dual Magazine carrier mold with MRD ( Rusty special)
These molds are a taco style carrier with the fold on the bottom. They use two MRD's one for each mag to be independently adjustable. They come with a trim jig, and are available with or without teklok blocking. If you order the mold without teklok blocking the MRD mounting holes fit the Multi wing or any other belt loop with .75" spacing.
Make your own Adjustable Kydex Flashlight carrier.
I've taken all of the guesswork out of making these carriers yourself. All of my measurements are precise and designed to fit flashlights with a diameter up to 1.25". Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Mold will make one carrier per press
- Constructed of High-Density Polyethylene (HDPE)
- Designed to make a convenient yet strong fold on side style carrier.
- Designed for use with MRD (Tulster Magazine Retention Device)
- Completely Ambidextrous
- Easily accommodates either TEKLOK or FOMI
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
QUICK ACCESS AND A HIGHER LEVEL OF CONFIDENCE.
Provides Ultimate Firearm Concealment.
Our appendix carry or AIWB (appendix Inside The Waistband) holster is designed to be worn from the 11 o'clock - 1 o'clock position, which we believe to be the best form of carrying concealed. Allows for easy quick access, less prone to printing, and a higher level of confidence in gun retention.
The holster comes with an option of either one or two 1.5” tuck-able J-hooks, which allow you to wear the holster with either an untucked or tucked in shirt.
The mod wing is aligned perfectly with the j-hooks to ensure proper engagement with the belt. The mod wing acts as a fulcrum against the back of your belt to tuck the grip into your body providing the ultimate concealment.
These are ambidextrous holsters (but let us know your set-up preference below).
Specially cut to accommodate RMR sights and suppressor height sights and still provide a complete snug and secure fit. As always these come with adjustable retention to allow you to find your perfect draw.
- Made from durable .080" Kydex - providing the perfect balance between strength and definition
- Specially designed to be worn from the 11 o'clock - 1 o'clock position, which we believe to be the best form of carrying concealed.
- Light-weight for all day comfort
- Versatility in wearing options provided by selecting one or two durable 1.5" J-Hook belt clips
- This AIWB holster designed to hug the body, providing the ultimate concealment.
- Can accommodate Glocks with suppressors and RMR sights easily and securely
- Ambidextrous - but let us know your set-up preference below
- Adjustable Retention allowing you to dial in the perfect draw
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
* Firearm and magazine not included
THE PERFECT BALANCE BETWEEN STRENGTH AND DEFINITION
The Best Inside the WaistBand Holster for Concealed Carry
- Made from durable .080" Kydex - providing the perfect balance between strength and definition
- Minimalistic style for discreet concealment
- Extremely light-weight for all day comfort
- Adjustable Retention allowing you to dial in the perfect draw
- Dual-purpose, Adjustable belt clip for straight drop or a forward cant
- Versatile Oxcreek Tactical belt clips are amazing - easy on, easy off. Easily wear them at any location on the belt with ease.
- Holster comes standard with a sweat shield
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
* Firearm and magazine not included
The Latest Technology for Maximum Versatility.
The process of making these Outside-the-WaistBand (OWB) holsters starts with a 3D scan of the firearm, which is imported and modified using CAD computer software, then milled on a CNC machine, and lastly, finished off and inspected by hand.
This level of precision ensures a perfect fit and contour for each holster, every time.
- Made from durable .080" Kydex - providing the perfect balance of strength, retention, and definition.
- High-Quality Adjustable belt loops allow for a:
- Custom-positioned ride height to fit your carry needs
- Dialed-in cant, creating your perfect draw angle.
- Adjustable retention to fit your carry application.
Make your own Adjustable Kydex Handcuff Carrier.
I've taken all of the guesswork out of making these carriers yourself. All of my measurements are precise and designed to fit your Peerless Chain, Peerless 801 Hinge, or Smith & Wesson chain cuffs perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Mold will make one carrier per press
- Constructed of High-Density Polyethylene (HDPE)
- Designed to make a convenient yet strong fold-from-bottom style carrier.
- Designed for adjustable retention with two screws at the top of the carrier.
- .25" Gap built-in for maximum retention adjustment.
- Completely Ambidextrous
- Easily accommodates either TEKLOK or Paddle belt attachment blocking with our Setup on 1.5" centers.
- Also available without blocking to accommodate other set-ups.
- Compatible with FFR holster's single stack folding jig, or can be folded by hand using a set of cuffs.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
Click Here for Additional Router Trim Jigs
* Includes the mold and optional Router Trim Jig only.
*All other hardware and supplies pictured are not included. Finished Kydex Handcuff carrier images are for reference only and are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Grab an additional Router Trim Jig for your Adjustable Kydex Handcuff Carrier Mold.
If you want additional trim Jigs for your Handcuff Carrier Mold, we've got you covered. Trim Jigs really streamline the making process, increase consistency and speed, and reduce the margin of error significantly.
Each Jig is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Trim jig will aid in the trimming and consistency with our Handcuff Carrier Mold
- Constructed of High-Density Polyethylene (HDPE)
- The Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly.
* Includes the Router Trim jig only.
*All other hardware and supplies pictured are not included. Finished Kydex Handcuff carrier images are for reference only and are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Make your own sheath to keep Your TDI right where you need it.
The Ka-Bar small TDI knife is a staple for law enforcement nationwide. This mold will make the same sheath we sell.
Our sheaths are popular with officers from all over because of their solid retention, durability, versatility, and compact profile. Stop worrying about your TDI falling out of that factory sheath while your carrying it. The factory TDI sheaths are widely known for their lack of secure retention and limited carry options - OxCreek TDI Knife Sheaths address and fix all those problems.
I've taken all of the guesswork out of making this sheath yourself. All of my measurements are precise and designed to fit your Ka-Bar Small TDI knife perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- This mold is the one we developed for our very popular Ka-Bar Small TDI Sheaths.
- Constructed of High-Density Polyethylene (HDPE)
- Mold features raised drill indicators for eyelets spaced on .75" centers.
- As with all my molds it features a raised border that is exactly .25" over sized from the final shape of the sheath.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Router Trim Jig?
- Due to the small size, the trim jigs are a combination trim. Each side of the sheath requires two position setups on the trim jig to get the final shape.
- The trim jigs feature locating tabs on the bottom two eyelet holes, and two threaded inserts at the top to secure it.
- Coming straight off the trim jig the retention is set extremely firm. This can be lightened if desired during the edge finishing step.
- Creates a sheath with easy and fast removal with no harnesses or straps needed to secure your TDI in the sheath because of the snug fit.
- Designed for IWB (inside the waistband) carry
- Ambidextrous
Click here for Additional Router Trim Jigs
* Includes the mold and optional Router Trim Jig only. Other hardware and supplies are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Grab an additional Router Trim Jig for your TDI Knife Sheath Mold.
If you want an additional router Trim jigs for your Ka-Bar small TDI knife Sheath Mold, we've got you covered. Trim Jigs really streamline the making process, increase consistency and speed, and reduce the margin of error significantly.
All our molds and jigs are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each jig is made to our exact specifications and held to our same high-quality-control standards. These jigs take all of the guesswork out of trimming this sheath yourself. All of my measurements are precise. (see instructions here).
- Trim Jig will aid in the trimming and consistency of our Ka-Bar TDI Sheath Mold.
- Constructed of High-Density Polyethylene (HDPE)
- This Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly.
- Due to the small size, this trim jigs are a combination trim. Each side of the sheath requires two position setups on the trim jig to get the final shape.
- The trim jigs feature locating tabs on the bottom two eyelet holes, and two threaded inserts at the top to secure it.
- Coming straight off the trim jig the retention is set extremely firm. This can be lightened if desired during the edge finishing step.
* Includes the Router Trim Jig only. Other hardware and supplies are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Now you can keep your Kimber Pepper Blaster right where you need it.
I've taken all of the guesswork out of making these carriers yourself. All of my measurements are precise and designed to fit your Kimber Pepper Blaster perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-milled in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Will make One Taco-Style Pepper Blaster carrier per press.
- Constructed of High-Density Polyethylene (HDPE)
- Available with or without FOMI Blocking
- Designed to work perfectly with both membrane and membrane-less vacuum forming.
- .25" adjustable retention
- Molded with two drill indicators for retention hardware.
*Includes the mold only. Other hardware and supplies are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
These flags are constructed from two layers, laser cut, Painted, and laminated together. We can do thin blue line, red line, or just a two color flag. These flags are approximately 12"x20" and 1/2" thick, and come with hardware for hanging on wall.
We can also do all sorts of custom laser engraving/cutting. Reach out with any ideas.
We are now offering Laser engraving for your holster attachments. Just email us your vector file to info@oxcreektactical.com, and ship your clips to 53 County Route 31 oswego, NY 13126. No minimum or maximum.