Make your own Adjustable Kydex Magazine / Handcuff Combo Carrier.
I've taken all of the guesswork out of making these magazine / handcuff combo carriers yourself. All of my measurements are precise and designed to fit your Peerless Chain, Peerless 801 Hinge, ASP Hinged, or Smith & Wesson chain cuffs perfectly. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Mold will make one Magazine/Handcuff carrier combo per press
- Constructed of High-Density Polyethylene (HDPE)
- Built-in adjustable retention for both the mag and handcuff
- Designed for adjustable retention with two screws at the top of the carrier.
- Magazine carrier section designed to be adjusted with an MRD (Magazine Retention Device)
- Specially designed to be folded on the bottom to be able to give the most narrow profile available.
- Extreme versatility achieved by blocking for belt attachments with four raised circles 1.5" on center, allowing you to use paddles, TEKLOK, malice clips or any other attachment using 1.5" hole spacing.
- WorkS with all double stack 9mm, .357cal, and .40 cal magazines.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
Click Here for Additional Router Trim Jigs
* Includes the mold and optional Router Trim Jig only.
*All other hardware and supplies pictured are not included. Finished Kydex product images are for reference only and are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Grab an additional Router Trim Jig for you Magazine / Handcuff Combo Carrier Mold.
If you want additional trim Jigs for your Kydex Magazine / Handcuff Combo Carrier Mold, we've got you covered. Trim Jigs really streamline the making process, increase consistency and speed, and reduce the margin of error significantly.
All our molds and jigs are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each jig is made to our exact specifications and held to our same high-quality-control standards.
- Trim jig will aid in the trimming and consistency of our Kydex Magazine / Handcuff Combo Carrier Mold
- Constructed of High-Density Polyethylene (HDPE)
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly
* Includes Router Trim Jig only. Other hardware and supplies are not included.
*Finished Kydex product images are for reference only and are not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Perfect for Gun Disassembly, Cleaning, or EDC
The OxCreek Custom Parts Tray is perfect for keeping your gun parts organized and contained during disassembly and/or cleaning.
It is also great as an Everyday Carry (EDC) dump tray to keep those everyday items in one spot and easy to find in the morning or when getting ready for your next shift.
- Crafted from .080" high-quality kydex or extra-durable carbon fiber (pictured)
- Embossed with an oversized OxCreek Tactical logo
- 3/4" high reinforced rim to keep your parts contained
- An upper and lower divider create 3 separate areas.
- Tray Dimensions: 6 1/2" x 9" x 3/4"
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
We use the highest quality leather available to create our Hybrid Holster Backers.
We start with 12-14 oz. English Bridle Black Leather, reenforce it with custom stitching of your color choice, and finish it off with a truly hand-burnished edge - giving you a smooth, clean, premium quality backer for your holster.
You will not be disappointed
- Single Clip Hybrid Backer
- Made with premium black leather
- Custom perimeter stitching in your choice of color
- Offered in three sizes using Glocks as the size reference:
- Small - Glock 26 (or smaller)
- Medium - Glock 19
- Large - Glock 17
- Can be used with any similar-sized handgun holster.
Bulk / Large Quantity discounts Available:
- 10-19 backers @ $17.50ea.
- Use promo code BACKER250 at checkout
- 20+ backers @ $15.00ea.
- Use promo code BACKER500 at checkout
* Includes Leather backer only. All other items and accessories not included
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
- Designed to be worn inside the waistband (IWB)
- Made from durable .080" Kydex - providing the perfect balance between strength and definition
- Minimalistic style for discreet concealment
- Extremely light-weight for all day comfort
- Adjustable Retention allowing you to dial in the perfect draw
- Dual-purpose, Adjustable belt clip for straight drop or a forward cant
- Versatile OxCreek Tactical belt clips are amazing - easy on, easy off. Easily wear them at any location on the belt with ease
- Holster comes standard with a sweat shield
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
* Firearm and magazine not included
- Made from durable .080" Kydex - providing the perfect balance between strength and definition
- Minimalistic style for discreet concealment
- Extremely light-weight for all day comfort
- Adjustable Retention allowing you to dial in the perfect draw
- Dual-purpose, Adjustable belt clip for straight drop or a forward cant
- Versatile Oxcreek Tactical belt clips are amazing - easy on, easy off. Easily wear them at any location on the belt with ease.
- Holster comes standard with a sweat shield
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
* Firearm and magazine not included.
Grab an Additional Router Trim Jig for your Magazine carrier Mold.
If you want additional trim Jigs for your Magazine Carrier Mold with MRD Blocking, we've got you covered. Trim Jigs really streamline the making process, increase consistency and speed, and reduce the margin of error significantly.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds and jigs are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each jig is made to our exact specifications and held to our same high-quality-control standards.
- This Trim jig will aid in the trimming and consistency of our Single Magazine Carrier Mold with Tulster MRD Blocking
- Constructed of High-Density Polyethylene (HDPE)
- Adding this Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
*Includes the Router Trim Jig only.
* Other hardware and supplies are not included. Images of finished holsters are for reference only and not included.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Click for Instructions & Video.
Your 'Easy Button' for making your own Kydex Mag Carriers.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Will make One Magazine carrier per press. (Single x2 Molds also available HERE)
- Constructed of High-Density Polyethylene (HDPE)
- Designed to be used with membrane-less vacuum forming, but can also work with a membrane former.
- Adding the Router Trim Jig option is recommended to help deliver consistent results and reduce the margin of error significantly. Need an Additional Trim Jig?
- Simply select the type of magazine you want a mold for above in the Carrier Style section.
Click here for Additional Router Trim Jigs
* Includes the mold and optional jig only.
*Other hardware and supplies are not included. Images of finished products are for reference only and not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
* The double stack mold is designed to fit Glock and M&P mags, however, it will also fit quite a few other double stack magazines.
* The Shield/XDs magazine molds were designed for Shield and you will have a .25" gap for adjustable retention. However, it will also fit the XDs magazine, but when folding the carrier you will need to fold the carrier over an XDs magazine, which will result in a smaller gap for adjustable retention, meaning, you will need a smaller spacer.
Video and Written Instructions.
Grab an additional Router Trim Jig for your Magazine carrier Mold.
If you want additional trim jigs for your Single Mag Carrier Mold or your Single x2 Magazine Carrier Mold, we've got your covered. I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds and jigs are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each jig is made to our exact specifications and held to our same high-quality-control standards.
- Trim jig will aid in the trimming and consistency of the Single Mag Carrier Mold or the Single x2 Magazine Carrier Mold
- Constructed of High-Density Polyethylene (HDPE)
- Adding this Router Trim Jig option is recommended to help deliver consistent results and reduce the margin of error significantly.
* Includes the Router Trim jig only.
*Other hardware and supplies are not included. Images of finished products are for reference only and not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
Your 'Easy Button' for making your own Kydex Mag Carriers.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Single Size mold will make One Magazine carrier per press.
- Double Size mold will make Two Magazine Carriers per press (Single x2).
- Specifically designed to be used with the Tulster Magazine Retention Device (MRD)
- This mold makes a Single (or single x2) Taco style magazine carrier
- Each mold is designed with FOMI blocking and our .4" blocking ensures a snug and complete seat for the MRD.
- The bottom portion of the carrier is closed.
- Constructed of High-Density Polyethylene (HDPE)
- Designed to be used with membrane-less vacuum forming, but can also work with a membrane former.
- Adding the Router Trim Jig option is recommended to help deliver consistent results, reduce time, and the margin of error significantly. Need an additional Trim Jig?
- The double stack 9/40 option is designed to work on virtually all double stack 9/40 magazines as well as G43 and many others using the MRD retention adjustment.
- The single stack option will work on virtually all single stack magazines. Has been tested with the following:
- 1911, Shield .45, Shield 9/40, XDs 9 and .45, Sig 938
- Simply select the type of magazine you want a mold for above in the Carrier Style section.
Click Here for additional Trim Jigs
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
*Includes the mold and optional jig only. Other hardware and supplies are not included. Images of finished holsters are for reference only and not included.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Click for Instructions & Video.
Your 'Easy Button' for making your own Kydex Mag Carriers.
I've taken all of the guesswork out of making them yourself. All of my measurements are precise and designed to fit many different magazine styles. Each mold is designed to make your manufacturing process simple and fast (see instructions here).
All our molds are hand-designed, 3D-modeled, then precision-cut in house on our CNC machines. This ensures each mold is made to our exact specifications and held to our same high-quality-control standards.
- Will make Two Single Magazine carriers per press. (Single Mold also available HERE)
- Constructed of High-Density Polyethylene (HDPE)
- Designed to be used with membrane-less vacuum forming, but can also work with a membrane former.
- Adding the Router Trim Jig option is recommended to help deliver consistent results and reduce the margin of error significantly. Need an additional Trim Jig?
- Simply select the type of magazine you want a mold for above in the Carrier Style section.
Click here for Additional Router Trim Jigs
* The double stack mold is designed to fit Glock and M&P mags, however, it will also fit quite a few other double stack magazines.
* The Shield/XDs magazine molds were designed for Shield and you will have a .25" gap for adjustable retention. However, it will also fit the XDs magazine, but when folding the carrier you will need to fold the carrier over an XDs magazine, which will result in a smaller gap for adjustable retention, meaning, you will need a smaller spacer.
* Includes the mold and optional jig only. Other hardware and supplies are not included. Images of finished products are for reference only and not included.
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
Don't see what you're looking for? Contact us below for a custom quote for your specific mold request.
Video and Written Instructions.
- Made from durable .080" Kydex - providing the perfect balance between strength and definition
- Designed to be worn inside the waistband (IWB)
- Minimalistic style for discreet concealment
- Extremely light-weight for all day comfort
- Adjustable Retention allowing you to dial in the perfect draw
- Dual-purpose, Adjustable belt clip for straight drop or a forward cant
- Versatile Oxcreek Tactical belt clips are amazing - easy on, easy off. Easily wear them at any location on the belt with ease
- Holster comes standard with a sweat shield
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
- Made from durable .080" Kydex - providing the perfect balance between strength and definition
- Designed to be worn outside the waistband (OWB)
- Select the best attachment method for your needs:
- A Paddle for carry right against the body with the paddle secured inside the waist of your pants, or
- A Quick Connect belt clip to secure the holster to your belt
- The Quick Connect fits belts up to 2.25" - allowing for easy on and off the belt, yet will not come off the belt unless you want it to
- The Quick Connect takes up a lot less belt space than the pancake style making it more comfortable
- Adjustable retention
- Perfect for range use and competition shooting
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time
The Latest Technology for Maximum Versatility.
The process of making these outside-the-waistband holsters starts with a 3D scan of the firearm, which is then imported and modified using CAD computer software, then milled on a CNC machine, and lastly, finished and inspected by hand.
This level of precision ensures a perfect fit and contour for each holster, every time.
- Made from durable .080" Kydex - providing the perfect balance of strength, retention, and definition
- Designed to be worn outside the waistband (OWB)
- High-Quality Adjustable belt loops allow for a:
- Custom-positioned ride height to fit your carry needs
- Dialed-in cant, creating your perfect draw angle
- Adjustable retention to fit your carry application
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
* Firearm and magazine not included
Fits on any Duty Belt.
Easy to Remove for Multiple Set-ups.
- Custom fabricated to fit the SOFTT-W Tourniquet carried by most law enforcement agencies.
- Makes it easy to carry our Soft T Tourniquet as part of your belt set-up
- Carrier will fit on any duty belt and is very easy to remove if you have multiple set-ups.
- Adjustable retention as each tourniquet varies slightly by the way it is folded.
- Made out of .080" thick kydex to stand up to the abuse of everyday use on the job.
- Fits belts up to 2.25"
* Because each of our products is individually made-to-order, please allow 2-3 weeks processing time.
* Tourniquet not included
Contact us for department-wide bulk orders.